MID49 Micro Rosette Arm System for Mounting Accessories to a Camera
MID49 has a new Micro Rosette Arm System for Mounting Accessories to a Camera. Users can install the bottom TWIST Spud or SWAP Bolt on their camera or cheeseplate and another on their monitor or accessory, then link them together with a Micro Rosette Arm.
Micro Rosette SWAP Bolt Kit is a modular accessory mounting arm with a bolt on 1/4-20 and 3/8-16 screws on each end, allowing attachment of a wireless transmitter, monitor, audio receiver, and more to a camera.
Install the bottom screw on your camera or cheeseplate and the top screw on your monitor or accessory, then link them together with a Micro Rosette Arm.
SWAP Bolt design lets you switch between 1/4-20 and 3/8-16 with multiple 3mm locating pin placement options. You can also swap the direction of the screw from top to bottom.
Extension arms have cerated teeth to allow for angled configurations in increments of 22.5º, a captive 1/4-20, and lengths of 12.5mm, 25mm, 50mm, 75mm, and 100mm.
Two 90º bend pieces are also included for off-axis configurations.
Check out the Spud Compatibility Chart Here.
The Micro Rosette TWIST Mount Kit (1/4-20 to 3/8-16) is a modular accessory mounting arm with a quick-release 1/4-20 spud on one end and a 3/8-16 spud on the other, allowing attachment of a wireless transmitter, monitor, audio receiver, and more to a camera.
Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then link them together with a Micro Rosette Arm.
Micro Rosette to TWIST Mount clamps have a variable friction design, so you can grab and twist the arm or accessory without loosening a thumbscrew.
Included ARRI 1/4-20 Spud has removable 3mm locating pins in ARRI standard 10.4mm spacing. Pins can also be installed with 15mm spacing, which is found on some 3rd party products.
The 3/8-16 Spud has removable 3mm locating pins in ARRI standard 15mm spacing.
Extension arms have cerated teeth to allow for angled configurations in increments of 22.5º, a captive 1/4-20, and lengths of 12.5mm, 25mm, 50mm, 75mm, and 100mm.
Two 90º bend pieces are also included for off-axis configurations.
Also available with a 1/4-20 on each end: Micro Rosette TWIST Mount Kit (1/4-20 to 1/4-20)
This kit will be available in late April.
The Micro Rosette Complete Kit is a modular accessory mounting arm that includes both quick-release 1/4-20 and 3/8-16 spuds on each end, as well as SWAP Bolt screw-down ends, allowing attachment of a wireless transmitter, monitor, audio receiver, and more to a camera.
Install the bottom TWIST Spud or SWAP Bolt on your camera or cheeseplate and another on your monitor or accessory, then link them together with a Micro Rosette Arm.
TWIST Mount– Micro Rosette to TWIST Mount clamps have a variable friction design, so you can grab and twist the arm or accessory without loosening a thumbscrew.
Included ARRI 1/4-20 Spuds have removable 3mm locating pins in ARRI standard 10.4mm spacing. Pins can also be installed with 15mm spacing, which is found on some 3rd party products.
The 3/8-16 Spuds have removable 3mm locating pins in ARRI standard 15mm spacing.
SWAP Bolt– The included Micro Rosette to SWAP Bolt ends let you switch between 1/4-20 and 3/8-16 with multiple 3mm locating pin placement options. You can also swap the direction of the screw from top to bottom.
Extensions– Extension arms have cerated teeth to allow for angled configurations in increments of 22.5º, a captive 1/4-20, and lengths of 12.5mm, 25mm, 50mm, 75mm, and 100mm.
Monitor Hinge– Two 90º bend pieces are also included for off-axis configurations, and Micro Rosette to TWIST Spuds are included to build a Micro Rosette Monitor TWIST Hinge Kit.
The Monitor Hinge configuration allows pan, tilt, and folding action of a 5-inch to 7-inch monitor on a camera.
This kit also ships in late April.
